Huawei OceanStor S2600 - RAID Group Configuration Commands; Createrg

6.1 RAID Group Configuration Commands
RAID group configuration commands are used to create or delete RAID groups, change the
names, and query the information of RAID groups.
6.1.1 createrg
6.1.2 deleterg
6.1.3 chgrg
6.1.4 showrg
6.1.5 chgrgredundantcopy
6.1.6 showrgredundantcopy
6.1.1 createrg
Function
The command createrg is used to create a RAID group.
Format
createrg [ -n name ] -l level [ -m mirrordisk number ] -d subrack ID, slot ID :subrack ID, slot
ID : … :
Parameters
Keyword and Value
Description Default Value
-n name The name of a RAID group.
The name contains 1 to 32
characters, including
numbers, letters,
underscores, and hyphens.
The first character cannot be
a hyphen.
The name of the RAID
groups is case sensitive, and
must be unique. The default
name can be used for only
once.
RAIDXXX.
-l level The RAID group level. The
value can be 0, 1, 3, 5, 6 or
10.
None.
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)