Huawei OceanStor S2600 - Showpoolinfo

Parameters
Keyword and Value Description Default Value
-pi pool ID
The resource pool ID. The value is A or B, and it is
case insensitive.
None.
-i LUN ID
The LUN ID to be queried. The value ranges from
0 to 511.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l The showpoollun -pi pool ID command queries information of all the resource LUNs in
the resource pool.
l The showpoollun -pi pool ID -i LUN ID command queries information of a specified
resource LUN in the resource pool.
Example
Query information of all the resource LUNs in resource pool A.
OceanStor: admin> showpoollun -pi a
Pool ID Pool LUN ID Pool LUN Status Pool LUN Name
A 8 Free f5
System Response
None.
9.1.7 showpoolinfo
Function
The command showpoolinfo is used to query information on a resource pool.
Format
showpoolinfo -i pool ID
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)