Huawei OceanStor S2600 - Showdiskinfo; Chgdisklight

5.2.2 chgdisklight
5.2.1 showdiskinfo
Function
The command showdiskinfo is used to query the information about disk manufacturers.
Format
showdiskinfo -s subrackid
Parameters
Keyword and Value Description Default Value
-s subrackid The enclosure ID. The value
ranges from 0 to 7.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showdiskinfo is used to query the information about disk manufacturers.
Example
Query the manufacturer information about the disks in the controller enclosure.
OceanStor: admin> showdiskinfo -s 0
Subrack ID 0 disk info
DiskID Vendor
0 SEAGATE
1 SEAGATE
2 SEAGATE
3 SEAGATE
4 SEAGATE
5 SEAGATE
6 SEAGATE
7 SEAGATE
8 SEAGATE
9 SEAGATE
10 SEAGATE
11 SEAGATE
5.2.2 chgdisklight
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-5