Huawei OceanStor S2600 Command Reference

5.13 Host Port Configuration Commands
Host port configuration commands are used to configure and query the information about the
host port.
5.13.1 showfps
5.13.2 chgfps
5.13.3 showsasmode
5.13.4 showiscsiip
5.13.5 chgiscsiip
5.13.6 chgiscsiroute
5.13.7 chgiscsiname
5.13.8 showiscsiroute
5.13.9 showfcmode
5.13.10 chgfcmode
5.13.11 showfcport
5.13.1 showfps
Function
The command showfps is used to query the rates of FC host ports.
Format
showfps [ -c controller ID [ -i port ID ] ]
Parameters
Keyword and Value
Description Default Value
-c controller ID The controller ID. The value
is A or B, and is case
insensitive.
None.
5 Device Management Commands
OceanStor S2600 Storage System
Command Reference
5-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)

Huawei OceanStor S2600 Specifications

General

Model	OceanStor S2600
Form Factor	2U
Power Supply	Redundant power supplies
Controller Count	2
Max. Number of Supported Hard Drives	24
Operating Temperature	0°C to 40°C
Supported Protocols	FC, iSCSI, CIFS, NFS
RAID Levels	0, 1, 5, 6, 10, 50
Cache Memory	Up to 8 GB
Storage System Type	Hybrid (supports both HDD and SSD)
Supported Drive Types	SAS, SATA
Host Interface	8 Gbit/s Fibre Channel, 1/10 Gbit/s iSCSI
Operating Humidity	10% to 90%