Huawei OceanStor S2600 - Chghostgroup

Parameters
Keyword and Value Description Default Value
-f When you delete a host
group, you do not need to
enter the confirmation
information.
None.
-i host group ID The host group ID. The value
ranges from 0 to 31.
0.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When you run this command to delete a host group, ensure that the host group does not contain
a host or a mapping.
Example
Delete host group 2 without confirmation.
OceanStor: admin> deletehostgroup -f -i 2
6.3.3 chghostgroup
Function
The command chghostgroup is used to change the name and the OS type of a host group.
Format
chghostgroup -i host group ID [-n host group name] | [-t OS type]
Parameters
Keyword and Value
Description Default Value
-i host group ID The host group ID. The value
ranges from 0 to 31.
None.
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-17