Huawei OceanStor S2600 - Chgfcmode

Format
showfcmode
Parameters
None.
Modes
Normal mode.
Level
Guest level and administrator level.
Usage Guidelines
None.
Example
Query the topology of the current FC port.
OceanStor: admin> showfcmode
Controller Port ID Mode
A 0 Loop
A 1 Loop
B 0 Loop
B 1 Loop
5.13.10 chgfcmode
Function
The command chgfcmode is used to change the topology of the current FC port.
Format
chgfcmode -c controller ID -i Port ID -m mode
Parameters
Keyword and Value
Description Default Value
-c controller ID The controller ID. The value
is A or B, and is case
insensitive.
None.
-i Port ID The ID of an FC port. The ID
value ranges from 0 to 3.
None.
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-35