Function
The command deletemap is used to delete a host LUN mapping.
Format
deletemap [ -f ] -i map ID
Parameters
Keyword and Value Description Default Value
-f When you delete a host LUN
mapping, you do not need to
enter the confirmation
information.
None.
-i map ID The ID for LUN mapping. None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command deletemap is used to delete a host LUN mapping.
Example
Delete a LUN mapping by specifying the ID to 0x1010000.
OceanStor: admin> deletemap -i 0x1010000
Are you sure to delete the mapping{y/n}?y
6.4 Disk Configuration Commands
Disk configuration commands are used to enable the disk reconstruction function and the disk
copyback function, query the details and set the type for a disk.
6.4.1 startrecon
6.4.2 startcopyback
6.4.3 showdisk
6.4.4 chgdisktype
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-31
To Next Page
Loading...
