Huawei OceanStor S2600 - Chghyimgrollbackspeed

Parameters
Keyword and Value Description Default Value
-i HyperImage ID
The HyperImage ID. The value ranges from 0 to
127.
You can query the information by running the
showhyimginfo command.
None.
-n copy name
The copy name. The name contains 1 to 32
characters, including numbers, letters, underscores,
and hyphens. The first character cannot be a
hyphen.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Create a copy of the HyperImage with the ID of 13 and name of hey.
OceanStor: admin> createhyimgcp -i 13 -n hey
The command has been sent, please wait...
System Response
None.
9.1.18 chghyimgrollbackspeed
Function
The command chghyimgrollbackspeed is used to change rollback speed of the HyperImage.
Format
chghyimgrollbackspeed -i HyperImage ID -l speed level
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-19