Huawei OceanStor S2600 - Showhycpluninfo

HyperCopy Information
----------------------------------------------
HyperCopy ID | 2
HyperCopy Name | full1
Source LUN ID | --
Source LUN Link ID | 0
Source LUN Link Status | Normal
Source LUN Link Type | FC
Source LUN Array Name | --
Source LUN Array WWN | 2100135790864213
Source LUN WWN | --
Source LUN WWPN | --
Source LUN Number | --
Source LUN Type | External LUN
Source LUN Name | src0
Source LUN Status | Normal
Source LUN Capacity(MB) | 1024
HyperCopy User | Public
HyperCopy Speed | Middle
HyperCopy State | Created
HyperCopy Status | Normal
HyperCopy Progress(%) | 0
HyperCopy Type | Full
Mark | No
MarkTime | --
StartTime | --
EndTime | --
==================================================
System Response
None.
9.2.2 showhycpluninfo
Function
The command showhycpluninfo is used to query information on the target LUN of the
HyperCopy.
Format
showhycpluninfo -i HyperCopy ID [-ti LUN ID]
Parameters
Keyword and Value
Description Default Value
-i HyperCopy ID
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
None.
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)