Huawei OceanStor S2600 - Deleterg

Keyword and Value Description Default Value
-m mirrordisk number The number of mirroring
disks. You cannot use this
parameter when the RAID
level is RAID 0 or RAID 3 or
RAID 5 or RAID 6. You must
use this parameter when the
RAID level is RAID 1 or
RAID 10. The number of
mirroring disks must be more
than or equal to 2. The
number of disks in a RAID
group is the multiple of the
number of mirroring disks.
None.
-d subrack ID, slot ID The enclosure ID and the slot
ID. The disk to be chosen
must be a normal free disk.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
Note the following items when creating RAID group:
l The number of disks in a RAID 0 ranges from 1 to 24.
l The number of disks in a RAID 1 ranges from 2 to 24.
l The number of disks in a RAID 3 group ranges from 3 to 24.
l The number of disks in a RAID 5 group ranges from 3 to 24.
l The number of disks in a RAID 6 or RAID 10 group ranges from 4 to 24.
l The enclosure number ranges from 0 to 7. The slot number ranges from 0 to 11.
l The colon (:) is the end symbol.
Example
Create a RAID group by specifying the RAID level to 1, number of mirroring disks to 2, and
disk list to 0,5:0,3:
OceanStor: admin> createrg -l 1 -m 2 -d 0,5:0,3:
6.1.2 deleterg
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-3