Huawei OceanStor S2600 - Deleteport

Format
showhostport -i host ID
Parameters
Keyword and Value Description Default Value
-i host ID The host ID. The value
ranges from 0 to 255.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showhostport is used to query the list information about a host port based on the
host ID.
Example
Query the information about host port 0.
OceanStor: admin > showhostport -i 0
Port ID Port Name Port Information Port Type Host ID
0 a34b 2101001b32a34bc6 FC 0
1 834b 2100001b32834bc6 FC 0
6.3.12 deleteport
Function
The command deleteport is used to delete a specified host port.
Format
deleteport [ -f ] -i port ID
Parameters
Keyword and Value
Description Default Value
-f When you delete a host port,
you do not need to enter the
confirmation information.
None.
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-26 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)