Huawei OceanStor S2600 - Page 220

Function
The command chghycpstatus is used to change the HyperCopy status.
Format
chghycpstatus -i HyperCopy ID -s|-e|-p|-c
Parameters
Keyword and Value Description Default Value
-i HyperCopy ID
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
None.
-s
The parameter starts the HyperCopy.
None.
-e
The parameter ends the HyperCopy.
None.
-p
The parameter suspends the HyperCopy.
None.
-c
The parameter resumes the HyperCopy.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
Before starting the HyperCopy:
l Ensure that the HyperCopy is in created mode, copy completed mode, or stop mode.
l Create a resource pool for incremental copy.
l If the maximum number of the HyperCopy tasks supported by the controller is reached,
the HyperCopy tasks is waiting. After a certain HyperCopy task in the copy mode is
complete, a HyperCopy task in the waiting mode is automatically started.
Before ending the HyperCopy:
The HyperCopy should be in created mode, copy completed mode, or stop mode.
When suspending the HyperCopy:
Ensure that the HyperCopy is in waiting or copying mode.
Before resuming the HyperCopy:
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-36 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)