Huawei OceanStor S2600 - Page 245

Function
The command showarraylinkinfo is used to query array link information.
Format
showarraylinkinfo -i array ID [-li link ID]
Parameters
Keyword and Value Description Default Value
-i array ID
The array ID. The value ranges from 0 to 31.
You can query the information by running the
showarrayinfo command.
None.
-li link ID
The link ID, the value ranges from 0 to 255.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l The showarraylinkinfo -i array ID command queries link information of a specified array.
l The showarraylinkinfo -i array ID -li link ID command queries information of a specified
link in a specified array.
Example
Query information of the link with the ID of 4 in the array with the ID of 0.
OceanStor: admin> showarraylinkinfo -i 0 -li 4
================================
Link Information
--------------------------------
Link ID | 4
Array ID | 0
Link Type | iSCSI
Local Controller | B
Local Port | 3
Remote Controller | B
Remote Port | 3
Connect Status | Unknown
Whether Be Used | No
Is Mirror Link | No
================================
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-61