Huawei OceanStor S2600 - Page 144

Format
showlun [ -i LUN ID ]
Parameters
Keyword and Value Description Default Value
-i LUN ID The LUN ID. The value
ranges from 0 to 511.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showlun is used to query the information about all LUNs in the system.
l The command showlun -i LUN ID is used to query the details about a specified LUN.
Example
Query the information about LUN 0.
OceanStor: admin> showlun -i 0
=========================================================================
LUN Information
-------------------------------------------------------------------------
ID | 0
Name | 10g_1
LUN WWN | 60:01:88:21:00:E8:41:29:00:08:7F:AD:00
| :00:00:00
Status | Fault
Capacity(MB) | 10240
Strip Unit Size(KB) | 64
RAID Group ID | 1
Format Progress(%) | --
Ascription Controller | A
Working Controller | A
Cache Prefetch Policy | Intelligent
Cache Write Policy | Write back; Mirroring
Running Cache Write Policy | Write back; Mirroring
Changed Strip Unit Size(KB) | --
Strip Unit Size Progress(%) | --
Strip Unit Size Speed | --
Whether Private LUN | No
Expanded LUN | --
Pool ID | --
SnapShot ID | --
HyperCopy ID | --
=========================================================================
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)