Huawei quidway s7700 - Optional) Setting the Maximum Number of Global IGMP Entries for an Instance; Optional) Configuring the Maximum Number of IGMP Group Memberships on an Interface

4.6.3 (Optional) Setting the Maximum Number of Global IGMP
Entries for an Instance
Context
Do as follows on the S7700 connected to user hosts.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
igmp [ vpn-instance vpn-instance-name ]
The IGMP view is displayed.
Step 3 Run:
limit number
The maximum number of global IGMP entries of an instance is set.
----End
4.6.4 (Optional) Configuring the Maximum Number of IGMP
Group Memberships on an Interface
Context
Do as follows on the S7700 connected to hosts.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The IGMP interface view is displayed.
The S7700 uses this interface to communicate with hosts. On the S7700, VLANIF interfaces
and loopback interfaces support IGMP.
Step 3 Run:
igmp limit number
The maximum number of IGMP group memberships is set on the interface.
----End
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 4 IGMP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87