Huawei quidway s7700 - Example for Configuring Multicast VLAN Replication Based on Interfaces

multicast-vlan user-vlan number snooping-state
----------------------------------------------------------------
10 3 IGMP Enable /MLD Disable
[SwitchA] display user-vlan vlan
Total user vlan 3
user-vlan snooping-state multicast-vlan snooping-state
-----------------------------------------------------------------------------
100 IGMP Enable /MLD Disable 10 IGMP Enable /MLD Disable
200 IGMP Enable /MLD Disable 10 IGMP Enable /MLD Disable
300 IGMP Enable /MLD Disable 10 IGMP Enable /MLD Disable
----End
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 10 100 200 300
#
igmp-snooping enable
#
vlan 10
igmp-snooping enable
multicast-vlan enable
multicast-vlan user-vlan 100 200 300
#
vlan 100
igmp-snooping enable
#
vlan 200
igmp-snooping enable
#
vlan 300
igmp-snooping enable
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface GigabitEthernet1/0/2
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
interface GigabitEthernet1/0/3
port hybrid pvid vlan 300
port hybrid untagged vlan 300
#
return
3.5.2 Example for Configuring Multicast VLAN Replication Based
on Interfaces
Networking Requirements
As shown in Figure 3-5, the Router is connected to the multicast source. GE1/0/0 of the Switch
A is connected to the Router. GE1/0/1 provides services for ISP1, and GE1/0/2 provides services
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 3 Multicast VLAN Replication Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64