2 IGMP Snooping Configuration
About This Chapter
This chapter describes the procedure for configuring IGMP snooping and maintenance
commands, and provides configuration examples.
2.1 IGMP Snooping Overview
This section describes the functions and advantages of the IGMP snooping protocol.
2.2 IGMP Snooping Supported by the S7700
This section describes IGMP snooping features supported by the S7700.
2.3 Configuring IGMP Snooping
This section describes how to configure IGMP snooping in a VLAN.
2.4 Configuring Static Layer 2 Multicast
This section describes how to configure static multicast entries in a VLAN.
2.5 Configuring a Static Multicast MAC Address
This section describes how to configure a static multicast MAC address.
2.6 Configuring Layer 2 Multicast CAC
This section describes how to configure the Layer 2 multicast CAC function.
2.7 Configuring Layer 2 Multicast SSM Mapping
This section describes how to configure the Layer 2 multicast SSM mapping function.
2.8 Maintaining Layer 2 Multicast
Maintaining Layer 2 multicast involves resetting Layer 2 Multicast statistics, and debugging
IGMP Snooping.
2.9 Configuration examples
This section provides several configuration examples of Layer 2 multicast.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 2 IGMP Snooping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
To Next Page
Loading...
