Huawei quidway s7700 - Example for Configuring PIM GR (Ipv6)

#
return
l Configuration file of SwitchD
#
sysname SwitchD
#
vlan batch 400 to 402
#
ipv6
#
multicast ipv6 routing-enable
#
acl ipv6 number 2000
rule 0 permit source FF3E::1/64
#
acl ipv6 number 2001
rule 0 permit source FF0E::1/64
#
interface Vlanif400
ipv6 enable
ipv6 address 2003::2/64
pim ipv6 sm
#
interface Vlanif401
ipv6 enable
ipv6 address 2004::2/64
pim ipv6 sm
#
interface Vlanif402
ipv6 enable
ipv6 address 2005::1/64
pim ipv6 sm
#
pim-ipv6
c-bsr 2004::2
c-rp 2004::2 group-policy 2001
#
interface GigabieEthernet1/0/0
port hybrid pvid vlan 400
port hybrid untagged vlan 400
#
interface GigabieEthernet2/0/0
port hybrid pvid vlan 401
port hybrid untagged vlan 401
#
interface GigabieEthernet3/0/0
port hybrid pvid vlan 402
port hybrid untagged vlan 402
#
pim-ipv6
ssm-policy 2000
#
13.14.2 Example for Configuring PIM GR (IPv6)
Networking Requirements
In a multicast application, if the active/standby switchover occurs on the device, the new master
MPU deletes multicast forwarding entries from the LPUs and relearns PIM routes and multicast
forwarding entries. During this process, multicast traffic is interrupted.
The PIM GR function on an IPTV network protects the core devices and edge devices. When
an active/standby switchover occurs, the PIM GR function ensures that the multicast data is
forwarded normally. This improves the fault tolerance capability of the devices on the IPTV
network.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 13 PIM-SM (IPv6) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
503