EasyManua.ls Logo

Huawei quidway s7700 - Configuration Example; Example for Configuring the Ipv6 PIM-SM Network

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When a PIM-IPv6 fault occurs, run the following debugging commands in the user view to
locate the fault.
For more information about debugging commands, refer to the Quidway S7700 Smart Routing
Switch Debugging Reference.
Procedure
l Run the debugging pim ipv6 all command in the user view to enable all the PIM-IPv6
debugging.
l Run the debugging pim ipv6 event [ advanced-acl6-number ] in the user view to enable
the debugging of PIM-IPv6 events.
l Run the debugging pim ipv6 routing-table [ advanced-acl6-number ] command in the
user view to enable the debugging of PIM-IPv6 routing table.
l Run the debugging pim ipv6 neighbor [ basic-acl6-number | [ receive | send ] ]
*
command
in the user view to enable the debugging of PIM-IPv6 neighbors.
l Run the debugging pim ipv6 assert [ advanced-acl6-number | [ receive | send ] ]
*
command in the user view to enable the debugging of PIM-IPv6 Assert.
l Run the debugging pim ipv6 join-prune [ advanced-acl6-number | [ receive | send ] ]
*
command in the user view to enable the debugging of PIM-IPv6 Join/Prune.
l Run the debugging pim ipv6 rp [ receive | send ] command in the user view to enable the
debugging of PIM-IPv6 RP.
l Run the debugging pim ipv6 register [ advanced-acl6-number ] command in the user view
to enable the debugging of PIM-IPv6 Register.
----End
13.14 Configuration Example
Configuration examples are provided to show how to construct a basic IPv6 PIM-SM network.
13.14.1 Example for Configuring the IPv6 PIM-SM Network
Networking Requirements
As shown in Figure 13-1, multicast is deployed on the network of an Internet service provider
(ISP). The network is deployed with IGP and is connected to the Internet. The unicast routing
routes work normally. The S7700s on the network need to be configured properly so that user
hosts can receive the VoD information in multicast mode.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 13 PIM-SM (IPv6) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
495

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals