Huawei quidway s7700 - Configuring MSDP Authentication; Establishing the Configuration Task

Information about (Source, Group)-based SA filtering policy:
Import policy: 3000
Export policy: 3002
Information about SA-Requests:
Policy to accept SA-Request messages: 2000
Sending SA-Requests status: enable
Minimum TTL to forward SA with encapsulated data: 10
SAs learned from this peer: 0, SA Cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 16/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Peer authentication: unconfigured
Peer authentication type: none
Run the display msdp sa-cache command to check the information about (S, G) entries in SA
Cache.
l If group-address is specified, the (S, G) entry to which a specified group corresponds is
displayed.
l If source-address is specified, the (S, G) entry to which a specified source corresponds is
displayed.
l If 2-byte-as-number or 4-byte-as-number is specified, the (S, G) entry whose Origin RP
attribute belongs to a specified AS is displayed.
<Quidway> display msdp sa-cache
MSDP Source-Active Cache Information of VPN-Instance: public net
MSDP Total Source-Active Cache - 3 entries
MSDP matched 3 entries
(8.8.8.8, 225.0.0.200)
Origin RP: 4.4.4.4
Pro: BGP, AS: 10
Uptime: 00:00:33, Expires: 00:05:27
(8.8.8.8, 225.0.0.201)
Origin RP: 4.4.4.4
Pro: BGP, AS: 1.0
Uptime: 00:00:33, Expires: 00:05:27
(8.8.8.8, 225.0.0.202)
Origin RP: 4.4.4.4
Pro: BGP, AS: 65535.65535
Uptime: 00:00:33, Expires: 00:05:27
7.10 Configuring MSDP Authentication
MSDP peer authentication contains MSDP MD5 authentication and Key-Chain authentication.
You can choose either authentication mode.
7.10.1 Establishing the Configuration Task
After Anycast RP is configured for PIM-SM intra-domain or inter-domain multicast, you can
configure MSDP authentication as required to ensure the security of the TCP connection between
MSDP peers.
Applicable Environment
Configuring MSDP authentication can enhance the security of the TCP connections between
MSDP peers.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 7 MSDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
254