Huawei quidway s7700 - Example for Configuring Layer 2 Multicast CAC for a VLAN

[Switch] display igmp-snooping port-info
-----------------------------------------------------------------------
(Source, Group) Port Flag
Flag: S:Static D:Dynamic M: Ssm-mapping
-----------------------------------------------------------------------
VLAN 3, 3 Entry(s)
(*, 225.1.1.1) GE1/0/1 S--
1 port(s)
(*, 225.1.1.2) GE1/0/1 S--
1 port(s)
(*, 225.1.1.3) GE1/0/1 S--
1 port(s)
-----------------------------------------------------------------------
According to the preceding information, multicast groups 225.1.1.1 to 225.1.1.3 are configured
with static forwarding entries.
# View the multicast forwarding table.
[Switch] display l2-multicast forwarding-table vlan 3
VLAN ID : 10, Forwarding Mode : IP
--------------------------------------------------------------------
(Source, Group) Interface Out-Vlan
--------------------------------------------------------------------
Router-port GigabitEthernet3/0/1 3
(*, 225.1.1.1) GigabitEthernet1/0/1 3
GigabitEthernet3/0/1 3
(*, 225.1.1.2) GigabitEthernet1/0/1 3
GigabitEthernet3/0/1 3
(*, 225.1.1.3) GigabitEthernet1/0/1 3
GigabitEthernet3/0/1 3
--------------------------------------------------------------------
Total Group(s) : 3
The preceding information shows the VLAN ID and outgoing interface mapping the data from
multicast groups 225.1.1.1 to 225.1.1.3.
----End
Configuration Files
l Configuration file of the S7700
#
sysname Switch
#
vlan batch 3
#
igmp-snooping enable
#
vlan 3
igmp-snooping enable
#
interface GigabitEthernet1/0/1
port hybrid tagged vlan 3
l2-multicast static-group group-address 225.1.1.1 to 225.1.1.3 vlan 3
#
interface GigabitEthernet3/0/1
port hybrid tagged vlan 3
igmp-snooping static-router-port vlan 3
#
return
2.9.2 Example for Configuring Layer 2 Multicast CAC for a VLAN
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 2 IGMP Snooping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45