Huawei quidway s7700 - Configuration Example; Example for Configuring the Ipv6 PIM-DM Network

12.12 Configuration Example
Configuration examples are provided to show how to construct a basic IPv6 PIM-DM network.
12.12.1 Example for Configuring the IPv6 PIM-DM Network
Networking Requirements
On the experiment network shown in Figure 12-1, multicast is deployed. IGP is also deployed
on the network, and unicast routes work normally. The S7700s on the network need to be
configured properly so that user hosts can receive the VoD information in multicast mode.
Figure 12-1 Networking diagram for configuring basic IPv6 PIM-DM functions
GE1/0/0
2002::2
GE2/0/0
3001::1
2001::5
SwitchA
GE1/0/0
2001::1
GE2/0/0
4001::1
GE1/0/0
2003::2
GE3/0/0
2003::1
Source
SwitchB
SwitchC
Host A Host B
Host C Host D
GE2/0/0
2002::1
Switch
Physical interface VLANIF interface IP address
SwitchA GE1/0/0 VLANIF100 2001::1
GE2/0/0 VLANIF101 2002::1
GE3/0/0 VLANIF102 2003::1
SwitchB GE1/0/0 VLANIF200 2002::2
GE2/0/0 VLANIF201 3001::1
SwitchC GE1/0/0 VLANIF300 2003::2
GE2/0/0 VLANIF301 4001::1
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 12 PIM-DM (IPv6) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
445