EasyManua.ls Logo

Huawei quidway s7700 - Checking the Configuration

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pim-ipv6
The PIM-IPv6 view is displayed.
Step 3 Run:
ssm-policy { basic-acl6-number | acl6-name acl6-name }
The SSM group address range is configured.
NOTE
Ensure that the SSM group address ranges of all switchs in the network must be identical.
----End
13.3.8 Checking the Configuration
After basic functions of IPv6 PIM-SM are configured, you can check information about the
BSR, RP, PIM interface, PIM neighbor, and PIM routing table through commands.
Procedure
l Run the display pim ipv6 bsr-info command to check information about the BSR in the
PIM-SM (IPv6) domain.
l Run the display pim ipv6 interface [ interface-type interface-number | up | down ]
[ verbose ] command to check information about PIM-IPv6 interfaces.
l Run the display pim ipv6 neighbor [ ipv6-link-local-address | interface interface-type
interface-number | verbose ]
*
command to check information about PIM-IPv6 neighbors.
l Run the display pim ipv6 rp-info [ ipv6-group-address ] command to check information
about RPs in the PIM-SM domain.
l Run the following commands to check the PIM-IPv6 multicast routing table.
– display pim ipv6 routing-table [ ipv6-source-address [ mask mask-length ] | ipv6-
group-address [ mask mask-length ] | flags { act | del | exprune | ext | loc | niif |
nonbr | none | rpt | sg_rcvr | sgjoin | spt | swt | wc | upchg } | fsm | incoming-
interface { interface-type interface-number | register } | mode { dm | sm | ssm } |
outgoing-interface { exclude | include | match } { interface-type interface-number |
none | register } ]
*
[ outgoing-interface-number [ number ] ]
– display pim ipv6 routing-table brief [ ipv6-source-address [ mask mask-length ] |
ipv6-group-address [ mask mask-length ] | incoming-interface { interface-type
interface-number | register } ]
*
----End
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 13 PIM-SM (IPv6) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
461

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals