Huawei quidway s7700 - Clearing (S, G) Information in SA Cache; Monitoring the Running Status of MSDP

Context
CAUTION
The statistics of MSDP peers cannot be restored after you clear it. So, confirm the action before
you use the command.
Procedure
l Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] peer [ peer-
address ] command in the user view to clear the TCP connection with a specified MSDP
peer and all statistics of the specified MSDP peer.
l Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] statistics [ peer-
address ] command in the user view to clear the statistics of an MSDP peer or multiple
MSDP peers of the public network instance, VPN instance, or all instances, if MSDP peers
are not reset.
l Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] control-message
counters [ peer peer-address ] command in the user view to clear the statistics about the
received, sent, and discarded MSDP messages.
----End
7.11.2 Clearing (S, G) Information in SA Cache
When you want to reset contents in an SA cache, you can clear all (S, G) information from the
SA cache. Note that the (S, G) information cannot be restored after you clear it.
Context
CAUTION
The (S, G) information in SA Cache cannot be restored after you clear it. So, confirm the action
before you use the command.
Procedure
l Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-
address ] command in the user view to clear the entries in MSDP SA Cache.
----End
7.11.3 Monitoring the Running Status of MSDP
During the routine maintenance, you can run the display commands in any view to know the
running of MSDP.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 7 MSDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
258