EasyManua.ls Logo

Huawei quidway s7700 - Checking the Configuration; Configuring a BSR Administrative Domain

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Context
Do as follows on all the C-BSRs in the PIM-SM domain:
NOTE
This configuration is optional. By default, a switch does not check the C-RP address and the group address
contained in a received Advertisement message and adds them to the RP-set.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pim [ vpn-instance vpn-instance-name ]
The PIM view is displayed.
Step 3 Run:
crp-policy { advanced-acl-number | acl-name acl-name }
The range of the valid C-RP addresses and the range of the multicast group addresses that a
switch serves are specified. When receiving an Advertisement message, the switch checks the
C-RP address and the addresses of the groups that the C-RP serves in the message. The C-RP
address and the addresses of the groups that the C-RP serves are added to the RP-Set only when
they are in the valid address range. The C-RP spoofing can thus be prevented.
{ advanced-acl-number | acl-name acl-name }: specifies the advanced ACL. The ACL defines
the filtering policy for the C-RP address range and the address range of the groups that a C-RP
serves.
----End
6.5.7 Checking the Configuration
After the control parameters of C-RPs and C-BSRs are adjusted, you can check information
about the BSR and RP and check whether a BSR boundary is configured on the interface through
commands.
Procedure
l Run the display pim [ vpn-instance vpn-instance-name | all-instance ] bsr-info command
to check the BSR in a PIM-SM domain.
l Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info [ group-
address ] command to check the RP in a PIM-SM domain.
----End
6.6 Configuring a BSR Administrative Domain
A PIM-SM network can be divided into multiple BSR administrative domains and a global
domain. This effectively reduces the load of a single BSR, and provides a special service for
specific multicast groups.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 6 PIM-SM (IPv4) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
162

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals