EasyManua.ls Logo

Huawei quidway s7700 - Checking the Configuration

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
msdp [ vpn-instance vpn-instance-name ]
The MSDP view is displayed.
Step 3 Run:
peer peer-address sa-policy export [ acl advanced-acl-number ]
The rules for filtering an SA message forwarded to a remote MSDP peer is set.
The parameters of the command are explained as follows:
l peer-address: specifies the address of a remote MSDP peer.
l acl: specifies the advanced filtering list. Only the (S, G) information that matches the ACL
rule is forwarded to the peer specified by peer-address.
l If the peer peer-address sa-policy export command without acl is used, the switch does not
forward any (S, G) information to the peer specified by peer-address.
----End
7.9.5 Checking the Configuration
After filtering rules for SA messages are configured, you can run related commands to check
detailed information about MSDP peers and SA cache information.
Procedure
l Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-
address | source-address | [ 2-byte-as-number | 4-byte-as-number ] ]
*
command to check
SA Cache of the public network instance, VPN instance, or all instances.
l Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status
[ peer-address ] command to check detailed information about the MSDP peer status.
----End
Example
Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-
address ] command, and you can view information about the (Source, Group)-based SA filtering
policy field and check whether the configuration is valid. For example:
<Quidway> display msdp peer-status
MSDP Peer 172.40.41.1, AS ?
Description:
Information about connection status:
State: Up
Up/down time: 00:26:41
Resets: 0
Connection interface: Vlanif10 (172.40.41.2)
Number of sent/received messages: 27/28
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:26:56
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 7 MSDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
253

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals