3 Multicast VLAN Replication Configuration
About This Chapter
This chapter describes the procedure for configuring multicast VLAN replication and
maintenance commands, and provides configuration examples.
3.1 Multicast VLAN Replication Overview
After multicast VLAN replication is configured on a switch, the upstream router only needs to
transmit multicast data to a multicast VLAN. This function saves bandwidth because the
upstream router does not need to send a copy of multicast data to each user VLAN.
3.2 Multicast VLAN Replication Supported by the S7700
This section describes the multicast VLAN replication features supported by the S7700.
3.3 Configuring Multicast VLAN Replication Based on User VLANs
This section describes how to implement multicast VLAN replication based on user VLANs.
3.4 Configuring Multicast VLAN Replication Based on Interfaces
This section describes how to configure multicast VLAN replication based on interfaces.
3.5 Configuration Examples
This section provides configuration examples of multicast VLAN replication.
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 3 Multicast VLAN Replication Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
To Next Page
Loading...
