EasyManua.ls Logo

Huawei quidway s7700 - Page 82

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Preparation
To complete the configuration, you need the following data:
l Interface connected to RouterA and the VLAN that the interface belongs to
l User-side interfaces and the VLANs that the interfaces belong to
Procedure
Step 1 Enable IGMP snooping globally.
<SwitchA> system-view
[SwitchA] igmp-snooping enable
Step 2 Create a multicast VLAN and enable IGMP snooping in the multicast VLAN.
<SwitchA> system-view
[SwitchA] igmp-snooping enable
[SwitchA] vlan 10
[SwitchA-vlan3] igmp-snooping enable
[SwitchA-vlan3] multicast-vlan enable
[SwitchA-vlan3] quit
Step 3 Create user VLANs and enable IGMP snooping in the user VLANs.
[SwitchA] vlan 100
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] quit
[SwitchA] vlan 200
[SwitchA-vlan200] igmp-snooping enable
[SwitchA-vlan200] quit
[SwitchA] vlan 300
[SwitchA-vlan300] igmp-snooping enable
[SwitchA-vlan300] quit
Step 4 Bind user VLANs 100, 200, and 300 to multicast VLAN 10.
[Switch] vlan 10
[Switch-vlan3] multicast-vlan user-vlan 100 200 300
[Switch-vlan3] quit
Step 5 Add interfaces to VLANs as hybrid interfaces.
# Add GE1/0/0 to multicast VLAN 10.
[SwitchA] interface gigabitethernet1/0/0
[SwitchA-GigabitEthernet1/0/0] port hybrid pvid vlan 10
[SwitchA-GigabitEthernet1/0/0] port hybrid untagged vlan 10
[SwitchA-GigabitEthernet1/0/0] quit
# Add GE1/0/1 to VLAN 100, GE1/0/2 to VLAN 200, and GE1/0/3 to VLAN 300.
[SwitchA] interface gigabitethernet1/0/1
[SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 100
[SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 100
[SwitchA-GigabitEthernet1/0/1] quit
[SwitchA] interface gigabitethernet1/0/2
[SwitchA-GigabitEthernet1/0/2] port hybrid pvid vlan 200
[SwitchA-GigabitEthernet1/0/2] port hybrid untagged vlan 200
[SwitchA-GigabitEthernet1/0/2] quit
[SwitchA] interface gigabitethernet1/0/3
[SwitchA-GigabitEthernet1/0/3] port hybrid pvid vlan 300
[SwitchA-GigabitEthernet1/0/3] port hybrid untagged vlan 300
[SwitchA-GigabitEthernet1/0/3] quit
Step 6 Verify the configuration. View information about the multicast VLAN and user VLANs on
SwitchA.
[SwitchA] display multicast-vlan vlan
Total multicast vlan 1
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 3 Multicast VLAN Replication Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
63

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals