RP: 1.1.1.1
Protocol: pim-sm, Flag: SPT ACT
UpTime: 01:51:24
Upstream interface: Vlanif50
Upstream neighbor: 192.168.4.1
RPF prime neighbor: 192.168.4.1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif60
Protocol: pim-sm, UpTime: 01:51:24, Expires: -
# Run the active/standby switchover commands on SwitchC.
[SwitchC] slave switchover
# After SwitchC performs an active/standby switchover, during PIM GR, run the display pim
routing-table command on SwitchB and SwitchC to view the routing tables. The command
output is as follows:
<SwitchB> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 1.1.1.1
Protocol: pim-sm, Flag: WC
UpTime: 02:52:38
Upstream interface: Vlanif30
Upstream neighbor: 192.168.2.1
RPF prime neighbor: 192.168.2.1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif40
Protocol: pim-sm, UpTime: 02:52:38, Expires: 00:03:00
(10.110.1.100, 225.1.1.1)
RP: 1.1.1.1
Protocol: pim-sm, Flag: SPT ACT
UpTime: 02:52:38
Upstream interface: Vlanif30
Upstream neighbor: 192.168.2.1
RPF prime neighbor: 192.168.2.1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif40
Protocol: pim-sm, UpTime: 02:52:38, Expires: 00:03:12
<SwitchC> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 1.1.1.1
Protocol: pim-sm, Flag: WC
UpTime: 02:51:24
Upstream interface: Vlanif50
Upstream neighbor: 192.168.4.1
RPF prime neighbor: 192.168.4.1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif60
Protocol: igmp, UpTime: 02:51:24, Expires: -
(10.110.1.100, 225.1.1.1)
RP: 1.1.1.1
Protocol: pim-sm, Flag: SPT ACT
UpTime: 02:51:24
Upstream interface: Vlanif50
Upstream neighbor: 192.168.4.1
RPF prime neighbor: 192.168.4.1
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 6 PIM-SM (IPv4) Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
218