[PE-B] mpls lsr-id 1.1.1.2
[PE-B] mpls
[PE-B-mpls] quit
[PE-B] mpls ldp
[PE-B-mpls-ldp] quit
# Configure Eth-Trunk 10 as the multicast loopback interface.
[PE-B] interface eth-trunk 10
[PE-B-Eth-Trunk10] trunkport GigabitEthernet 3/0/5
[PE-B-Eth-Trunk10] service type multicast-tunnel
[PE-B-Eth-Trunk10] quit
# Create a VPN-BLUE instance and enter the VPN instance view. Configure the VPN IPv4
prefix and create ingress and egress routes of the instance. Start an IP multicast route and
configure the Share-Group. Specify the MTI to be bound to the VPN instance and switch-
address-pool range of Switch-MDT.
[PE-B] ip vpn-instance BLUE
[PE-B-vpn-instance-BLUE] route-distinguisher 200:1
[PE-B-vpn-instance-BLUE] vpn-target 200:1 export-extcommunity
[PE-B-vpn-instance-BLUE] vpn-target 200:1 import-extcommunity
[PE-B-vpn-instance-BLUE] multicast routing-enable
[PE-B-vpn-instance-BLUE] multicast-domain share-group 239.2.2.2 binding mtunnel 1
[PE-B-vpn-instance-BLUE] multicast-domain switch-group-pool 225.4.4.1 28
# Create a VPN-RED instance and enter the VPN instance view. Configure the VPN IPv4 prefix
and create ingress and egress routes of the instance. Start an IP multicast route and configure
the Share-Group. Specify the MTI to be bound to the VPN instance and switch-address-pool
range of Switch-MDT.
[PE-B] ip vpn-instance RED
[PE-B-vpn-instance-RED] route-distinguisher 100:1
[PE-B-vpn-instance-RED] vpn-target 100:1 export-extcommunity
[PE-B-vpn-instance-RED] vpn-target 100:1 import-extcommunity
[PE-B-vpn-instance-RED] multicast routing-enable
[PE-B-vpn-instance-RED] multicast-domain share-group 239.1.1.1 binding mtunnel 0
[PE-B-vpn-instance-RED] multicast-domain switch-group-pool 225.2.2.1 28
# Enable LDP on GigabitEthernet 1/0/0 and start PIM-SM.
[PE-B] interface gigabitethernet 1/0/0
[PE-B-GigabitEthernet1/0/0] port hybrid pvid vlan 70
[PE-B-GigabitEthernet1/0/0] port hybrid untagged vlan 70
[PE-B-GigabitEthernet1/0/0] quit
[PE-B] interface vlanif 70
[PE-B-Vlanif70] ip address 192.168.7.1 24
[PE-B-Vlanif70] pim sm
[PE-B-Vlanif70] mpls
[PE-B-Vlanif70] mpls ldp
# Bind GigabitEthernet 2/0/0 to the VPN-BLUE instance, and start PIM-SM.
[PE-B] interface gigabitethernet 2/0/0
[PE-B-GigabitEthernet2/0/0] port hybrid pvid vlan 80
[PE-B-GigabitEthernet2/0/0] port hybrid untagged vlan 80
[PE-B-GigabitEthernet2/0/0] quit
[PE-B] interface vlanif 80
[PE-B-Vlanif80] ip binding vpn-instance BLUE
[PE-B-Vlanif80] ip address 10.110.3.1 24
[PE-B-Vlanif80] pim sm
# Bind GigabitEthernet 3/0/0 to the VPN-RED instance, and start PIM-SM.
[PE-B] interface gigabitethernet 3/0/0
[PE-B-GigabitEthernet3/0/0] port hybrid pvid vlan 90
[PE-B-GigabitEthernet3/0/0] port hybrid untagged vlan 90
[PE-B-GigabitEthernet3/0/0] quit
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 8 IPv4 Multicast VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
301
To Next Page
Loading...
