---------------------------------------------------------------------
                                               100            -
                                               ----           ----------
VLAN 20 limit information:
---------------------------------------------------------------------
                                               50             -
                                               ----           ----------
VLAN 20 channel limit information:
---------------------------------------------------------------------
                                      bjtv     15             -
                                               ----           ----------
interface GigabitEthernet1/0/1 VLAN 10 channel limit information:
---------------------------------------------------------------------
                                      cctv     20             -
                                               ----           ----------    
Run the display l2-multicast limit vlan 20 command to check the configurations of Layer 2
multicast CAC in VLAN 20.
The following are the configurations of Switch B.
[SwitchB] display l2-multicast limit vlan 20
L2-multicast limit information, The unit of bandwidth is kbits/sec
---------------------------------------------------------------------
                                               ConfigEntries  ConfigBandwidth
                                               CurrentEntries CurrentBandwidth
---------------------------------------------------------------------
VLAN 20 limit information:
---------------------------------------------------------------------
                                                      50             -
                                                       0             -
VLAN 20 channel limit information:
---------------------------------------------------------------------
                                              bjtv    15             -     
                                                       0             - 
Run the displayl2-multicast limit vlan 10 interface command to check the configurations of
multicast CAC of an interface in the VLAN.
The following are the configurations of Switch B.
[SwitchB] display l2-multicast limit vlan 10 interface gigabitethernet 1/0/1
L2-multicast limit information, The unit of bandwidth is Mbits/sec
---------------------------------------------------------------------
                                               ConfigEntries  ConfigBandwidth
                                               CurrentEntries CurrentBandwidth
---------------------------------------------------------------------
interface GigabitEthernet1/0/1 VLAN 10 channel limit information:
---------------------------------------------------------------------
                                            cctv        20             -
                                                        20             -    
----End
Configuration Files
l Configuration file of SwitchA
#
 sysname SwitchA
#
 vlan batch 20
#
 igmp-snooping enable
 #
vlan 20
 igmp-snooping enable
#
interface GigabitEthernet1/0/1
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 2 IGMP Snooping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48