Icom ID-31A

5
GPS/GPS-A OPERATION
5
5-21
Setting SSID7.
To assist in identifying a station’s type, the displayed
APRS
®
based SSID is added after the GPS-A data call
sign.
The SSID's adding method differs, depending on
whether if you enter a space in your call signs or not.
!5 Push D-pad() and D-pad(Ent) to select
“SSID .”
D-pad
(�)
(Ent)
!6 Push D-pad() to select SSID.
• --- : Change the space in call sign to "-".
If the space is the last character, delete
the space instead of changing it to a
"-".
Example: JA3YUA A  JA3YUA-A
• (-0) : No SSID. If you use a capital letter, it
will be deleted.
Example: JA3YUA A  JA3YUA
• -1 to -15 : Adds an SSID of -1 to -15 to your call
sign.
Example: “-9” is entered
JA3YUA A  JA3YUA-9
• -A to -Z : Adds an SSID of -A to -Z to your call
sign.
Example: “-Z” is entered
JA3YUA A  JA3YUA-Z
!7 After setting SSID, push D-pad(Ent).
(Continued on the next page)
Previous view