Icom ID-31A

5
GPS/GPS-A OPERATION
5-20
Transmitting GPS-A data ■ (Continued)
Setting Time Stamp4.
Set the time stamp function to transmit the received
time data in UTC (Universal Time Coordinated) time.
i Push D-pad() and D-pad(Ent) to select
“ Time
Stamp.”
D-pad
(�)
(Ent)
o Push D-pad() and D-pad(Ent) to select either the
DHM or HMS format.
• OFF : Does not transmit the time information.
• DHM : Transmits the time stamp in the Day, Hour,
and Minute format.
• HMS : Transmits the time stamp in the Hour, Min-
ute, and Second format.
Setting Altitude5.
Set the altitude data transmission.
!0 Push D-pad() and D-pad(Ent) to select
“ Altitude.”
!1 Push D-pad() and D-pad(Ent) to select
“ ON.”
Setting GPS-A Symbol6.
Select the desired GPS-A symbol which represents
your operating situation.
The selected GPS-A symbol channel's symbols (1~4)
are transmitted along with the position data.
!2 Push D-pad() and D-pad(Ent) to select
“GPS-A
Symbol .”
!3 Push D-pad() to select a symbol between 1: Per-
son, 2: Bicycle, 3: Car and 4: House.
• If you wish to use any GPS-A symbol (characters)
or previously saved symbol, see page 10-34 for
details.
!4 Set your desired symbol, and then push D-
pad(Ent).
(Continued on the next page)
Push to display
the "Edit Symbol"
screen.
NOTE:
If you transmit with the altitude setting ON, to those prod-
ucts that are not capable of displaying the altitude (IC-
9100, IC-80AD, IC-E80D, ID-880H, ID-E880, IC-92AD,
IC-E92D), the characters appear as a comment.
Previous view