9
PRIORITY WATCH
9-24
When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the VFO mode is automatically selected. The “PRIO”
icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “PRIO” icon blinks on the
screen.
Blinks
Blinks
Remains in the DR mode.
Automatically changes to the VFO mode.
DR MODE AND VFO FREQUENCY (Continued) ■
To Next Page
Loading...
