10
MENU SCREEN OPERATION
10
10-3
NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
In this item, set the scan options.
Scan
Pause Timer
Resume Timer
Program Skip
Bank Link
Program Link*
1
2sec~10sec~20sec or HOLD
0sec~2sec~5sec or HOLD
OFF or ON
A:□✔~Z:□✔
*
2
Be sure to insert the microSD card into the transceiver before selecting these items.
*
1
See page 10-16 for details on the preset values.
RANGE OR VALUE (Default is shown in bold)
DESCRIPTIONS
Selects the scan pause time. When
receiving signals, the scan pauses ac-
cording to the scan pause timer.
Selects the scan resume time from a
pause after the received signal disap-
pears.
Turns the Program Skip Scan function
ON or OFF for a VFO mode scan.
Selects banks to be scanned during a
Bank Link Scan.
Selects program scans to be scanned
during a the Program Link Scan.
QSO Recorder
<<REC Start>>*
2
Play Files*
2
Recorder Set
Player Set
PLAY FILES
REC Mode
RX REC Condition
File Split
PTT Auto REC
Skip Time
In this item, set the TX/RX voice recording options.
TX&RX or RX Only
Always or Squelch Auto
OFF or ON
OFF or ON
3sec, 5sec, 10sec or 30sec
DV Auto Reply*
2
Voice Memo
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Selects whether or not the squelch status
affects the RX voice signal recording.
Turns the PTT Automatic Recording
function ON or OFF.
Sets the Skip time to rewind or forward
the recorded audio when you push the
fast-rewind or fast-forward key during
playback.
Selects whether or not to automatically
create a new file if transmission and
reception, or squelch status (open and
close) is switched.
Selects to record the TX audio or not.
The recorded audio is played or erased.
Starts recording the received signal audio.
Records a voice audio to use the Auto
Reply function in the DV mode.
To Next Page
Loading...
