Icom ID-31A - Page 191

10
MENU SCREEN OPERATION
10-4
Menu items and Default settings (Continued) ■
NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
GPS
Alarm Area2
GPS Set
Altitude/Distance Units
Speed Units
GPS Out
Alarm Area1
In this item, set the GPS options.
Limited, Extended or Both
m or ft/ml
km/h, mph or knots
OFF or ON
0’05”/0.08’~0’15”/0.25’~
59’59”/59.99’
GPS Indicator
GPS Select
Manual Position
OFF or ON
OFF, Internal GPS, External GPS
or Manual
Power Save (Internal GPS) OFF, 1min, 2min, 4min, 8min or Auto
Position Format ddd˚mm.mm' or ddd˚mm'ss"
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Selects a GPS receiver that the trans-
ceiver receives its position data from.
Selects the internal GPS receiver power
save function.
Manually enters your current position.
Turns the GPS indicator ON or OFF.
Selects position format to display the
position.
Selects units to display the distance
and elevation.
Selects units to display the speed.
Enters the GPS alarm active range.
Selects the GPS alarm active range.
Selects the GPS information from the
internal GPS receiver that is output to
the [DATA] jack.
OFF
GPS(DV-G)
GPS TX Mode
GPS Sentence
GPS Message
RMC, GGA, GLL, VTG, GSA or GSV
GPS Logger*
2
GPS Logger
<<GPS Logger Only>>
Record Interval 1sec, 5sec, 10sec, 30sec or 60sec
OFF or ON
*
2
Be sure to insert the microSD card into the
transceiver before selecting these items.
GPS Position
GPS Information
GPS Memory
Displays the received GPS information.
Displays your position or other station’s
positions.
Displays memorized positions, or turns
the GPS alarm function ON or OFF.
Turns the GPS logger function ON or
OFF, to store your route as you move.
Selects the GPS Logger function record
interval.
Selects an operating mode to transmit
position data received from a GPS re-
ceiver.
Transmits position data in selected GPS
sentences.
Enter a GPS message of the GPS TX
function.
Turns ON the GPS logger function with
the transceiver in the Sleep mode.
Turns OFF the GPS TX function.
Previous view