innomar SBP smart - Page 48

48 User’s Manual INNOMAR Parametric Sub-Bottom Profilers / SESWIN
48 Innomar Technologie GmbH (2023-01)
This sets the increments for the range
controls and the auto range function.
Please see section 5.9.2 on page 51 for
details.
This item is not available with the
INNOMAR “smart” model.
Setup – Ruler Settings
The Ruler Settings are used to
customize the ruler lines shown in the
online echo plots.
!
Usually “Draw Text” and “Draw
Lines” should be enabled.
Setup – Bottom Track
The bottom track can be adjusted using
the “Bottom Track” dialog.
Please see section 5.9.7 on page 54 for
details.