: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.3 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The
Port Classification screen in Figure 4-9-2 appears.
Figure 4-9-2: QoS Ingress Port Classification page screenshot
The page includes the following fields:
Object Description
• Port
The port number for which the configuration below applies.
• QoS Class
Controls the default QoS class, i.e., the QoS class for frames not
classified in any other way. There is a one to one mapping
between QoS class, queue and priority. A QoS class of 0 (zero)
has the lowest priority.
• DP Level
Controls the default DP level, i.e., the DP level for frames not
classified in any other way.
• PCP
Controls the default PCP for untagged frames.
• DEI
Controls the default DEI for untagged frames.
• Tag Class
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
To Next Page
Loading...