6. Command Line Mode 
The CLI groups all the commands in appropriate modes according to the nature of the command. A 
sample of the CLI command modes are described below. Each of the command modes supports specific 
software commands. 
 
Command Groups: 
System  System settings and reset options 
IP  IP configuration and Ping 
Port  Port management 
MAC  MAC address table 
VLAN  Virtual LAN 
PVLAN  Private VLAN 
Security  Security management 
STP  Spanning Tree Protocol 
Aggr  Link Aggregation 
LACP  Link Aggregation Control Protocol 
LLDP  Link Layer Discovery Protocol 
LLDPMED  Link Layer Discovery Protocol Media 
EEE  Energy Efficient Ethernet 
PoE  Power Over Ethernet 
Thermal  Thermal Protection 
Led_power  LED power reduction 
QoS  Quality of Service 
Mirror  Port mirroring 
Config  Load/Save of configuration via TFTP 
Firmware  Download of firmware via TFTP 
UPnP  Universal Plug and Play 
MVR  Multicast VLAN Registration 
Voice VLAN  Specific VLAN for voice traffic 
IPMC  MLD/IGMP Snooping 
VLC  VLAN Control List 
 
6.1 System Command   
System Configuration 
Description: 
Show system configuration.