Interlogix IFS NS3502-8P-2S - Security Switch SNMP Trap Authentication Failure; Security Switch SNMP Trap Link-Up

IFS NS3502-8P-2S User Manual
398
Parameters:
<ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separate each field (:). For example, four
hexadecimal digits with a colon separate each field (:). For example,
fe00::030:4ffff:fea6:34d9'. The symbol '::' is a special syntax that can be used as a
shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can
only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
Example:
Set SNMP trap IPv6 destination address for 2001::0001
NS3502
-8P-2S:/>security switch snmp trap ipv6 destination 2001::0001
Security Switch SNMP Trap Authentication Failure
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
Security Switch SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable : Enable SNMP trap authentication failure
disable: Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
Default Setting:
enable
Example:
Disable SNMP trap authentication failure
NS3502
-8P-2S:/>security switch snmp trap authentication failure disable
Security Switch SNMP Trap Link-up
Description:
Set or show the port link-up and link-down trap mode.