4.2.13 Remote Syslog
Configure remote syslog on this page. The Remote Syslog screen in Figure 4-2-16 appears.
Figure 4-2-16: Remote Syslog page screenshot
The page includes the following fields:
Object Description
• Mode
Indicates the server mode operation. When the mode operation
is enabled, the syslog message will send out to syslog server. The
syslog protocol is based on UDP communication and received on
UDP port 514 and the syslog server will not send
acknowledgments back sender since UDP is a connectionless
protocol and it does not provide acknowledgments. The syslog
packet will always send out even if the syslog server does not
exist. Possible modes are:
Enabled: Enable remote syslog mode operation.
Disabled: Disable remote syslog mode operation.
• Syslog Server IP
Indicates the IPv4 host address of syslog server. If the switch
provide DNS feature, it also can be a host name.
• Syslog Level
Indicates what kind of message will send to syslog server.
Possible modes are:
Info: Send information, warnings and errors.
Warning: Send warnings and errors.
Error: Send errors.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...