Interlogix IFS NS3502-8P-2S - STP Port Edge; STP Port Autoedge

IFS NS3502-8P-2S User Manual
456
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
disable
Example:
Enable STP function on port1
NS3502
-8P-2S:/>stp port mode 1 enable
STP Port Edge
Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
Enable : Configure MSTP adminEdge to Edge
Disable : Configure MSTP adminEdge to Non-edge
Default:
disable
Example:
Enable STP edge function on port1
NS3502
-8P-2S:/>stp port edge 1 enable
STP Port AutoEdge
Description:
Set or show the STP autoEdge port parameter.