IPMC Parameter QI
Description:
Set or show the IPMC Query Interval.
Syntax:
IPMC Parameter QI [mld|igmp] [<vid>] [ipmc_param_qi]
Parameters:
mld|igmp :
mld : IPMC for IPv6 MLD
igmp: IPMC for IPv4 IGMP
<vid> : VLAN ID (1-4095) or 'any', default: Show all VLANs
ipmc_param_qi:
-1 : Default Value (125)
1~31744 : Query Interval in seconds
(default: Show IPMC Interface Query Interval
IPMC Parameter QRI
Description:
Set or show the IPMC Query Response Interval.
Syntax:
IPMC Parameter QRI [mld|igmp] [<vid>] [ipmc_param_qri]
Parameters:
mld|igmp :
mld : IPMC for IPv6 MLD
igmp: IPMC for IPv4 IGMP
<vid> : VLAN ID (1-4095) or 'any', default: Show all VLANs
ipmc_param_qri:
-1 : Default Value (100)
0~31744 : Query Response Interval in tenths of seconds
(default: Show IPMC Interface Query Response Interval
To Next Page
Loading...
Need help?
General
