Interlogix IFS NS3502-8P-2S - SMTP Configuration

IFS NS3502-8P-2S User Manual
70
4.2.14 SMTP Configuration
Configure SMTP Configuration on this page. The SMTP Configuration screen in Figure 4-2-17 appears.
Figure 4-2-17: SMTP Configuration Page Screenshot
The page includes the following fields:
Object
Description
• SMTP Mode
Enabled
It is for you to enable SMTP mode function. This mode offers you
to configure SMTP server and SMTP account information, system
will refer it to send an E-mail for alarm noticing
• SMTP Server
It is for you to set up a specify SMTP server DNS name or IP
address. If it is inputted a DNS name, please remember to input
DNS server IP address at IP configuration page.
• SMTP Port
It is for you to input the SMTP server port number. As default is
"25".
• SMTP
Authentication
Enabled
As usual SMTP server is denied to relay a mail from a different
domain, so you have to enable this option and input your mail
account and password for SMTP sever authorizing to forward a
mail from different domain. For example, you want a SMTP
server which located on mail.123.com send a mail to
mail.456.net.com.
If you want to send the mail to a SMTP server which located on
the same domain or the same SMTP server, you don't have to
enable SMTP authentication.
• Authentication
User Name
It is for you to input your mail account name.
• Authentication
Password
It is for you to input your mail account password.