udp : UDP keyword
<sport> : Source UDP/TCP port range (0-65535) or 'any'
<dport> : Destination UDP/TCP port range (0-65535) or 'any'
tcp : TCP keyword
<tcp_flags> : TCP flags: fin|syn|rst|psh|ack|urg [0|1|any]
permit : Permit forwarding (default)
deny : Deny forwarding
<rate_limiter>: Rate limiter number (1-15) or 'disable'
<port_copy> : Port list for copy of frames or 'disable'
<mirror> : Mirror of frames: enable|disable
<logging> : System logging of frames: log|log_disable
<shutdown> : Shut down ingress port: shut|shut_disable
Security Network ACL Delete
Description:
Delete ACE.
Syntax:
Security Network ACL Delete <ace_id>
Parameters:
<ace_id>: ACE ID (1-256)
Example:
Delete ACE 1
-8P-2S:/>security network acl delete 1
Security Network ACL Lookup
Description:
Show ACE, default: All ACEs.
Syntax:
Security Network ACL L
ookup [<ace_id>]
Parameters:
<ace_id>: ACE ID (1-256)
To Next Page
Loading...
Need help?
General
