Interlogix IFS NS3502-8P-2S - IP Source Guard Configuration

IFS NS3502-8P-2S User Manual
288
and transmitted.
• Rx and Tx Decline
The number of decline (option 53 with value 4) packets received
and transmitted.
• Rx and Tx ACK
The number of ACK (option 53 with value 5) packets received and
transmitted.
• Rx and Tx NAK
The
number of NAK (option 53 with value 6) packets received and
transmitted.
• Rx and Tx Release
The number of release (option 53 with value 7) packets received
and transmitted.
• Rx and Tx Inform
The number of inform (option 53 with value 8) packets received
and transmitted.
• Rx and Tx Lease
Query
The number of lease query (option 53 with value 10) packets
received and transmitted.
• Rx and Tx Lease
Unassigned
The number of lease unassigned (option 53 with value 11)
packets received and transmitted.
• Rx and Tx Lease
Unknown
The number of lease unknown (option 53 with value 12) packets
received and transmitted.
• Rx and Tx Lease
Active
The number of lease active (option 53 with value 13) packets
received and transmitted.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Clears the counters for the selected port.
4.12.10 IP Source Guard Configuration
IP Source Guard is a secure feature used to restrict IP traffic on DHCP snooping untrusted ports by
filtering traffic based on the DHCP Snooping Table or manually configured IP Source Bindings. It helps
prevent IP spoofing attacks when a host tries to spoof and use the IP address of another host. This page
provides IP Source Guard related configuration. The IP Source Guard Configuration screen in Figure
4-12-10 appears.