4.3.4.5 SNMPv3 Access
Configure SNMPv3 accesses table on this page. The entry index keys are Group Name, Security Model
and Security Level.
The SNMPv3 Access screen in Figure 4-3-8 appears.
Figure 4-3-8: SNMPv3 Accesses Configuration page screenshot
The page includes the following fields:
Object Description
• Delete
Check to delete the entry. It will be deleted during the next save.
• Group Name
A string identifying the group name that this entry should belong
to. The allowed string length is 1 to 32, and the allowed content
is the ASCII characters from 33 to 126.
• Security Model
Indicates the security model that this entry should belong to.
Possible security models are:
any: Accepted any security model (v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM)
• Security Level
Indicates the security model that this entry should belong to.
Possible security models are:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
• Read View Name
The names of the MIB view defining the MIB objects for which
this request may request the current values. The allowed string
length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
• Write View Name
The names of the MIB view defining the MIB objects for which
this request may potentially SET new values. The allowed string
length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
To Next Page
Loading...
Need help?
General
