Interlogix IFS NS3502-8P-2S - 6.10 Link Aggregation Control Protocol Command

IFS NS3502-8P-2S User Manual
463
Aggr Lookup [<aggr_id>]
Parameters:
<aggr_id>: Aggregation ID
Aggregation Mode
Description:
Set or show the link aggregation traffic distribution mode.
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
Parameters:
smac : Source MAC address
dmac : Destination MAC address
ip : Source and destination IP address
port : Source and destination UDP/TCP port
enable : Enable field in traffic distribution
disable: Disable field in traffic distribution
Default Setting:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Example:
Disable SMAC mode
NS3502
-8P-2S:/>Aggr mode smac disable
6.10 Link Aggregation Control Protocol Command
LACP Configuration
Description:
Show LACP configuration.