Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the
following items:
System Configuration Configure SNMP on this page.
System Information The system information is provides here.
SNMPv3 Communities
Configure SNMPv3 communities table on
this page.
SNMPv3 Users Configure SNMPv3 users table on this page.
SNMPv3 Groups
Configure SNMPv3 groups table on this
page.
SNMPv3 Views
Configure SNMPv3 views table on this
page.
SNMPv3 Accesses
Configure SNMPv3 accesses table on this
page.
4.3.2 SNMP System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in Figure 4-3-1 appears.
Figure 4-3-1: SNMP System Configuration page screenshot
The page includes the following fields:
Object Description
• Mode
Indicates the SNMP mode operation. Possible modes are:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
• Version
Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
• Read Community
Indicates the community read access string to permit access to
SNMP agent. The allowed string length is 0 to 255, and the
To Next Page
Loading...