Interlogix IFS NS3502-8P-2S - 6.11 LLDP Command

IFS NS3502-8P-2S User Manual
468
6.11 LLDP Command
LLDP Configuration
Description:
Show LLDP configuration.
Syntax:
LLDP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show LLDP configuration of port1~4
NS3502
-8P-2S:/>lldp configuration 1-4
LLDP Configu
ration:
===================
Interval : 30
Hold : 3
Tx Delay : 2
Reinit Delay: 2
Port Mode Port Descr
System Name System Descr System Capa Mgmt Addr
CDP awareness
----
-------- ---------- ----------- ------------ -----------
---------
-------------
1 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
2 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
3 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
4 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled